Asus PR-DLSW Computer Hardware User Manual


 
ASUS PR-DLSW motherboard user guide
1-9
Ultra-160 SCSI connectors. These dual-channel 68-pin Ultra-160
SCSI connectors support up to 30 SCSI devices, and data transfers
of 160Mbps.
LSI
®
SCSI controller. The LSI 53C1010R SCSI controller supports
up to 30 SCSI devices through the onboard dual-channel SCSI
connectors.
Flash ROM. This 4Mb firmware contains the programmable BIOS
program.
DIP switches (8-switch). This 8-switch Dual Inline Package (DIP)
allows you to select the CPU frequency multiple.
ServerWorks
®
Champion I/O Bridge 2X (CIOBX2). The
Champion I/O Bridge 2X (CIOBX2) provides a high performance
data flow path between the IMB and the I/O subsystem, which
supports multiple PCI-X interfaces that allows large, efficient, and
flexible I/O configurations. The CIOBX2 supports a 64-bit PCI-X I/O
bus that complies with PCI 2.2 specification.
ServerWorks
®
Champion south bridge (CSB5). The Champion
South Bridge (CSB5) primarily acts as a PCI to Low Pin Count
(LPC) bridge, but also supports several integrated functions
including dual-channel ATA/100 IDE controller, 4-port USB 1.1
interface, ACPI power management and detection, XIO-APIC, and
legacy functions 8237DMA, 8259APIC, and 8254 timer.
ASUS ASIC. This chip performs multiple system functions that
include hardware and system voltage monitoring, IRQ routing,
among others.
Audio controller. This C-Media 4-channel PCI audio chip supports
legacy audio and HRTF 3D positional audio functions.
PCI-X/PCI slots. Four 64-bit/133MHz PCI-X slots and one 64-bit/
66MHz PCI slot, and a 32-bit/33MHz PCI expansion slot support
bus master PCI-X/PCI cards.
Intel
®
82551QM Fast Ethernet controller. This LAN controller fully
supports 10BASE-T/100BASE-TX networking protocols.
AGP Pro 4X slot. This Accelerated Graphics (AGP) Pro 4X slot is
for 3.3V/1.5V AGP cards that support 1X, 2X, or 4X bus modes.
11
12
13
14
15
16
17
18
10
19
20