Filter
Top Products
2-21ASUS RS300-E8 Series
2.8.4 Installing the SSD cage (optional)
Follow the steps below to install the optional SSD cage on your server module.
4. Connect the SATA power cable and
the SATA connector to the SSD card.
2. With the SSD cage resting on a at
surface, insert the SSD card into the
SSD cage.
3. Secure the SSD card into the SSD
cage with the bundled screws.
• The SS Card ts in one
orientation only.
•
You can place two SSD cards
into the SSD cage.
SATA Power
cable
SATA
connector
1. Remove the three screws on the side
of the SSD cage.
2. Lift the SSD cage and set aside.