Filter
Top Products
2-102-10
2-102-10
2-10
Chapter 2: Basic installationChapter 2: Basic installation
Chapter 2: Basic installationChapter 2: Basic installation
Chapter 2: Basic installation
2.6 Installing a DIMM
The system motherboard comes with two Double Data Rate (DDR) Dual
Inline Memory Module (DIMM) sockets.
The following figure illustrates the location of the sockets:
• Installing DDR DIMMS other than the recommended configurations
may cause memory sizing error or system boot failure. Use any of
the recommended configurations in the table on the next page.
• Install only
identical identical
identical identical
identical (the same type and size) DDR DIMM in DIMM1
and DIMM2.
• Always install DIMMs with the same CAS latency. For optimum
compatibility, we recommend that you obtain memory modules from
the same vendor.
• The total memory detected by the system depends on the onboard
VGA shared memory setting.
2.6.12.6.1
2.6.12.6.1
2.6.1
Memory configurationsMemory configurations
Memory configurationsMemory configurations
Memory configurations
You may install up to 2 GB system memory using 256 MB, 512 MB, and
1 GB DDR DIMMs.
¤
184-pin DDR DIMM sockets
80 Pins104 Pins
DIMM1
DIMM2