Filter
Top Products
ASUS TUSL2 User’s Manual
3. HARDWARE SETUP
22
Motherboard Settings
3. H/W SETUP
7) CPU External Frequency Setting (DSW)
This option tells the clock generator what frequency to send to the CPU, DRAM,
AGP, and the PCI bus. This allows the selection of the CPU’s External fre-
quency.
IMPORTANT:
1. In JumperFree mode, all dip switches must be set to OFF.
2. When JumperFree mode is enabled, use BIOS setup in place of these switches
(see CPU Speed in Advanced Menu in BIOS Setup).
NOTE: Only selected switches are illustrated. For a complete frequency listing,
see next page.
TUSL2
®
COM1
TUSL2 CPU External
Clock (BUS) Frequency
Selection
DSW
CPU
DRAM
AGP
ON
12345
ON
12345
ON
12345
66.8MHz
100.2MHz
66.8MHz
ON
12345
ON
12345
ON
12345
ON
12345
ON
12345
(JumperFree Mode)
133.70MHz
100.30MHz
66.85MHz
103.0MHz
103.0MHz
68.7MHz
100.3MHz
100.3MHz
66.8MHz
140MHz
140MHz
70MHz
133.70MHz
133.70MHz
66.85MHz
140MHz
105MHz
70MHz
CPU
DRAM
AGP
NOTE: If your processor does not have a locked Frequency Multiple, you must
use CPU Core:Bus Freq. Multiple in 4.4 Advanced Menu to set the Frequency
Multiple. If the Frequency Multiple is locked, setting the Frequency Multiple in
BIOS setup will have no effect.