Asus TW300-E5/PI4 Personal Computer User Manual


  Open as PDF
of 174
 
ASUS TW300-E5/PI4 5-3
5.1.2 Installing hard disk drives
The motherboard supports Serial ATA hard disk drives. For optimal performance,
install identical drives of the same model and capacity when creating a disk array.
To install the SATA hard disks for a RAID conguration:
1. Install the SATA hard disks into the drive bays.
2. Connect the SATA signal cables.
3. Connect a SATA power cable to the power connector on each drive.
5.1.3 Setting the RAID item in BIOS
You must set the RAID item in the BIOS Setup before you can create a RAID
set(s). To do this:
1. Enter the BIOS Setup during POST.
2. Go to the Main Menu, select SATAConguration, then press <Enter>.
3. Select the item CongureSATAas, then press <Enter> to display the
conguration options.
4. Select RAID from the Congure SATA as item options, then press <Enter>.
5. Save your changes, then exit the BIOS Setup.
Refer to Chapter 4 for details on entering and navigating through the BIOS
Setup.
 previous next