4-28 Chapter 4: BIOS setup
4.5.3 OnBoardDevicesConguration
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2007, American Megatrends, Inc.
Onboard Device Conguraiton
High Denition Audio [Enabled]
Front Panel Type [HD Audio]
Marvell SATA/PATA Controller [Legacy Mode]
Marvell Boot ROM [Enabled]
PCIE GigaBit LAN1 [Enabled]
LAN Boot ROM [Disabled]
PCIE GigaBit LAN2 [Enabled]
LAN Boot ROM [Disabled]
VIA VT6308S Fireware 1394 [Enabled]
Serial Port1 Address [3F8/IRQ4]
Enable or Disable
High Denition Audio
Controller
BIOS SETUP UTILITY
Advanced
HighDenitionAudio[Enabled]
Allows you to enable or disable the High Denition Audio.
Conguration options: [Enabled] [Disabled]
Front Panel Type [HD Audio]
This item appears only when you enable the previous item and allows you
to set the front panel audio connector (AAFP) mode to legacy AC’97 or high-
denition audio depending on the audio standard that the front panel audio
module supports.
Conguration options: [AC97] [HD Audio]
Marvell SATA/PATA Controller [Legacy Mode]
Set this item to RAID Mode to create a RAID set using the EXT_SATA1-2
connectors and the external SATA ports.
Conguration options: [Legacy Mode] [RAID Mode] [Disabled]
Marvell Boot ROM [Enabled]
This item appears only when you set the previous item to [Legacy Mode] or
[RAID Mode].
Conguration options: [Disabled] [Enabled]
Please install the Marvell
®
Controller driver before using the black Serial ATA
connectors (EXT_SATA1-2). Refer to 6.2.4 Make Disk menu for details.