Filter
Top Products
4-22 Chapter 4: BIOS setup
4.4.11 Transaction Booster [Auto]
Allows you to set the system performance.
Conguration options: [Auto] [Disabled] [Enabled]
Relax Level [1]
This sub-item appears only when you set the Transaction Booster item to
[Disabled]. Set this item to a higher level to get better compatibility. Use the
<+> and <-> keys to adjust the value. The values range from 1 to 4.
Boost Level [1]
This sub-item appears only when you set the Transaction Booster item to
[Enabled]. Set this item to a higher level to get better performance. Use the
<+> and <-> keys to adjust the value. The values range from 1 to 8.
The following seven items on the next page appear only when you set the Ai
Overclock Tuner item to [Manual] and [X.M.P.] and are adjusted by typing the
desired values using the numeric keypad and press the <Enter> key. Use the
<+> and <-> keys to adjust the value. To restore the default setting, type [auto]
using the keyboard and press the <Enter> key.
4.4.12 CPU Voltage [Auto]
Allows you to set the CPU VCore voltage. The values range from 0.85000V to
1.70000V with a 0.00625V interval.
Refer to the CPU documentation before setting the CPU Vcore voltage. Setting
a high VCore voltage may damage the CPU permanently, and setting a low
VCore voltage may make the system unstable.
4.4.13 CPU PLL Voltage [Auto]
Allows you to set the CPU PLL voltage. The values range from 1.00V to 2.30V with
a 0.02V interval.
4.4.14 FSB Termination Voltage [Auto]
Allows you to set the front side bus termination voltage. The values range from
1.20V to 1.50V with a 0.02V interval.
4.4.15 DRAM Voltage [Auto]
Allows you to set the DRAM voltage. The values range from 1.80V to 3.00V with a
0.02V interval.
4.4.16 North Bridge Voltage [Auto]
Allows you to set the North Bridge voltage. The values range from 1.25V to 1.91V
with a 0.02V interval.