Filter
Top Products
16 ASUS TX97-X User’s Manual
III. INSTALLATION
(Jumpers)
III. INSTALLATION
3. Onboard Multi-I/O Selection (M/IO)
You can selectively disable each onboard Multi-I/O item (floppy, serial, paral-
lel, and IrDA) through Chipset Features Setup of BIOS SOFTWARE or dis-
able all Multi-I/O items at once with the following jumper in order to use your
own Multi-I/O card.
Multi-I/O M/IO
Enable [1-2] (Default)
Disable [2-3]
Multi I/O Setting (Enable / Disable)
Disabled
1
2
3
M/IO
Enable (Default)
1
2
3
M/IO
R
4. CPU External (BUS) Frequency Selection (FS0, FS1, FS2)
These jumpers tell the clock generator what frequency to send to the CPU. These
allow the selection of the CPU’s External frequency (or BUS Clock). The BUS Clock
times the BUS Ratio equals the CPU’s Internal frequency (the advertised CPU speed).
5. CPU to BUS Frequency Ratio (BF0, BF1, BF2)
These jumpers set the frequency ratio between the Internal frequency of the
CPU and the External frequency (called the BUS Clock) within the CPU. These
must be set together with the above jumpers CPU External (BUS) Frequency
Selection.
CPU External Clock (BUS) Frequency Selection
CPU : BUS Frequency Ratio
R
50MHz
FS1
1
2
3
FS0
FS2
55MHz
FS1
FS0
FS2
1
2
3
60MHz
FS1
FS0
FS2
1
2
3
66MHz
FS1
FS0
FS2
1
2
3
75MHz
FS1
FS0
FS2
1
2
3
3.0x(3/1)
3.0x(3/1)
----
----
----
1
2
3
BF1
BF0
BF2
2.5x(5/2)
2.5x(5/2)
1.0x(1/1)
2.0x(2/1)
----
1
2
3
BF1
BF0
BF2
2.0x(2/1)
2.0x(2/1)
2.0x(2/1)
2.0x(2/1)
----
1
2
3
BF1
BF0
BF2
1.5x(3/2)
3.5x(7/2)
3.0x(3/1)
3.0x(3/1)
----
1
2
3
BF1
BF0
BF2
----
----
----
----
4.0x(4/1)
1
2
3
BF1
BF0
BF2
----
----
----
----
4.5x(9/2)
1
2
3
BF1
BF0
BF2
P54C/K5
P55C/K6/MX
IBM/Cyrix 6x86
IBM/Cyrix 6x86L
AMD-K6 (.25µ)
Complete Names:
Intel Pentium P54C
Pentium P55C-MMX
AMD K5, K6
IBM/Cyrix 6x86(L) (M1)
IBM/Cyrix 6x86MX(M2)