Filter
Top Products
ASUS TX97-X User’s Manual 49
IV. BIOS SOFTWARE
IV. BIOS
(Power Management)
PWR Up On Modem Act (Enabled)
This field allows either settings of Enabled (default) or Disabled for powering up
the computer (turns the ATX power supply on) when the modem begins receiving or
transmitting data while the computer is off.
AC PWR Loss Restart (Disabled)
This field allows you to set whether you want your system to boot up after the power
has been interrupted. Disabled leaves your system off after reapplying power and
Enabled boots up your system after replying power.
Automatic Power Up (Disabled)
This field allows you to have an unattended or automatic power up of your system.
You may configure your system to power up at a certain time of the day by selecting
Everyday, which will allow you to set the time or at a certain time and day by selecting
By Date.
.....................................................................................................................................
Fan Monitor (xxxxRPM)
The onboard hardware monitor is able to detect the Chassis Fan Speed, CPU Fan
Speed, and the Power Supply Fan Speed in Rotations Per Minute (RPM). These
values refresh upon any key entries in the BIOS setup screen. Set to Ignore if one of
these are not used so that error messages will not be given.
Thermal Monitor (xxxC/xxxF)
The onboard hardware monitor is able to detect the CPU and MB (motherboard) tem-
peratures. These values refresh upon key entries. Set to Ignore only if necessary.
Voltage Monitor (xx.xV)
The onboard hardware monitor is able to detect the voltages put out by the voltage
regulators. These values refresh upon key entries. Set to Ignore only if necessary.
NOTE: If any of the monitored items are out of range, you will be prompted by this
message: “Hardware Monitor found an error, enter POWER MANAGEMENT
SETUP for details” The bottom of the screen will instruct you to: “Press F1 to
continue, DEL to enter SETUP”