Filter
Top Products
3-38 Chapter 3: BIOS setup
Chapter 3
Update To Normal Mode [Press Enter]
Allows you to use the SATA_6G_1 and SATA_6G_2 connectors as normal SATA
connectors.
When using only one hard disk in Normal Mode, connect the hard disk to the SATA_6G_1
connector on the motherboard.
Drive Xpert Device(s) List:
Port 0 / Port 1
Press <Enter> to display the information of the hard disks which are connected to the
SATA_6G_1 and SATA_6G_2 connectors on the motherboard.
Drive Xpert Mode Update:
Update To Super Speed [Press Enter]
Allows you to use the Super Speed function that combines two hard drives as one
single drive partition.
All original data of the two hard drives will be erased for Super Speed setup.
Update To EZ Backup [Press Enter]
Allows you to use the EZ Backup function that copies and maintains an identical
image of data from the SATA_6G_1 drive to the SATA_6G_2 drive.
All original data of the SATA_6G_2 hard disk will be erased for EZ Backup setup.