ATEN Technology ACS-1208L Switch User Manual


 
Starting Auto Scan:
To start Auto Scanning, key in the following Hotkey combination:
1. Invoke Hotkey Mode with the [NumLock] + [-] combination
2. Key in [A]
After you press A, you automatically exit Hotkey Mode, and enter Auto
Scan Mode.
3. To exit Auto Scan Mode, press [Esc] or [Spacebar]
Note: While Auto Scan Mode is in effect, ordinary keyboard and mouse
functions are suspended - only Auto Scan Mode compliant
keystrokes and mouse clicks can be input. You must exit Auto
Scan Mode in order to regain normal control of the console.
w
Skip Mode
This feature allows you to switch between computers in order to monitor
them manually. You can dwell on a particular port for as long or as little as
you like - as opposed to Auto Scanning, which automatically switches after a
fixed interval. To invoke Previous/Next Switching, key in the following Hotkey
combination:
1. Invoke Hotkey Mode with the [NumLock] + [-] combination
2. Key in [Arrow]
Where [Arrow] refers to the left or right Arrow key. After you press [Arrow],
you automatically exit Hotkey Mode, and enter Skip Mode where you can
switch ports as follows:
Skips from the current port to the first accessible port previous to it. (See
Scan/Skip Mode, p. 21, for information regarding accessible ports.)
Skips from the current port to the next accessible port.
Skips from the current port to the last accessible port of the previous
Station.
Skips from the current port to the first accessible port of the next Station.
Note: 1. Once Skip Mode has been invoked, until you exit, you can keep
on skipping simply by pressing an Arrow key. You dont have to
use the [NumLock] + [-] combination again.
2. While Skip Mode is in effect, ordinary keyboard and mouse
functions are suspended - only Skip Mode compliant keystrokes
can be input. You must exit Skip Mode in order to regain normal
control of the console.
3. To exit Skip Mode, press [Esc]
2002-01-15
14 ACS-1208L / ACS-1216L User Manual