Filter
Top Products
OSD Factory Default Settings
The factory default settings are as follows:
Setting Default
OSD Hotkey [Scroll Lock] [Scroll Lock]
Port ID Display Position Upper Right Corner
Port ID Display Duration 3 Seconds
Port ID Display Mode The Port Number plus the Port Name
Scan Duration 5 Seconds
Scan/Skip Mode All
Screen Blanker 0 (Disabled)
Logout Timeout 0 (Disabled)
Beeper Y (Activated)
Accessible Ports F (Full) For all Users on all Ports
Troubleshooting
Symptom Possible Cause Action
Erratic
behavior.
Unit not receiving
enough power.
Check that the Power Adapter that was
supplied with the unit is plugged in and
functioning properly.
2002-01-15
ACS-1208L / ACS-1216L User Manual 29