Filter
Top Products
Hotkey Beeper Control
The Beeper (see Activate Beeper, p. 23) can be Hotkey toggled On and Off.
To toggle the Beeper, key in the following Hotkey combination:
1. Invoke Hotkey Mode with the [NumLock] + [-] combination
2. Key in [B]
After you press [B], the Beeper toggles On or Off. The Command Line
displays Beeper On or Beeper Off for one second; then the message
disappears and you automatically exit Hotkey Mode.
Hotkey Summary Table
Combination Action
[Num Lock] + [-] [Port ID] [Enter] Switches access to the computer that corresponds
to that Port ID.
[T] [n] [Enter] Sets the Auto Scan interval to n seconds - where n
is a number from 1 - 255.
[A] Invokes Auto Scan Mode.
[←]
Invokes Skip Mode and skips from the current port
to the first accessible port previous to it.*
[→]
Invokes Skip Mode and skips from the current port
to the next accessible port.*
[↑]
Invokes Skip Mode and skips from the current port
to the last accessible port of the previous Station.*
[↓]
Invokes Skip Mode and skips from the current port
to the first accessible port of the next Station.*
[B] Toggles the Beeper On or Off.
* Once Skip Mode has been invoked, until you exit, you can keep on skipping
simply by pressing an Arrow key. You don’t have to use the [NumLock] + [-]
combination again.
2002-01-15
ACS-1208L / ACS-1216L User Manual 15