Filter
Top Products
Chapter 1. Introduction
5
Components
KH0116 Front View
(Continues on next page.)
No. Component Description
1 Port LEDs The Port LEDs provide status information about their
corresponding Computer Ports. There is one pair of LEDs for
each Port. The one on the left is the On Line LED; the one on
the right is the Selected Port LED:
An On Line LED lights ORANGE to indicate that the
computer attached to its corresponding port is up and
running.
A Selected LED lights GREEN to indicate that the
computer attached to its corresponding port is the one that
has the KVM focus. The LED is steady under normal
conditions, but flashes when its port is accessed under
Auto Scan Mode (see F7 SCAN:, page 32).
When the KH0116 is first powered on, the On Line and
Selected LEDs blink in sequence as the Switch performs a
self-test.
2 Reset Switch Pressing this switch in performs a system reset.
Note: The switch is recessed and must be pushed with a thin
object - such as the end of a paper clip, or a ballpoint pen.
23
1
564
kh0116-v2.book Page 5 Wednesday, March 22, 2006 4:53 PM