Filter
Top Products
Chapter 3. OSD Operation
29
(Continued from previous page.)
Setting Function
RESET STATION
IDS
If you change the position of one of the Stations in the daisy chain,
the OSD settings will no longer correspond to the new situation.
This function directs the OSD to rescan the Station positions of the
entire installation and updates the OSD so that the OSD Station
information corresponds to the new physical layout.
Only the Station Numbers get updated. Except for the Port
Names, all Administrator settings (such as Set Accessible Ports,
Set Quick View Ports, etc.), for all of the computers affected by the
change, have to be manually redone.
FIRMWARE
UPGRADE
In order to upgrade the KH0116's firmware (see Chapter 5), you
must first invoke Firmware Upgrade Mode with this setting.
kh0116-v2.book Page 29 Wednesday, March 22, 2006 4:53 PM