Filter
Top Products
KH0116 User Manual
6
(Continued from previous page.)
No. Component Description
3 Remote
Console Area
The KH0116 can be operated from a remote console (up to
150m away) with the purchase of the CE-250 KVM
Extender system.
If you choose to use a remote console, its cable plugs into
this connector.
Normally, both consoles can access the KH0116. Clicking
the Disable Remote button to the In position disables the
Remote Console – only the Local Console has access to
the switch.
Details on using the KH0116 with the CE-250 KVM
Extender system are provided on page 13.
4 Firmware
Upgrade Area
This area consists of two components: The Firmware
Upgrade Port; and the Firmware Upgrade Reset Switch.
The Firmware Upgrade Cable that transfers the
firmware upgrade data from the administrator's
computer to the KH0116 (see p. 42), plugs into the
Firmware Upgrade Port's RJ-11 connector.
During normal operation and while performing a
firmware upgrade, this switch should be in the NORMAL
position. If a firmware upgrade operation does not
complete successfully, slide this switch to the
RECOVER position and do a warm reset to return the
switch to its prior firmware state.
After returning the switch to its prior firmware state,
slide the switch back to the NORMAL position to
attempt the firmware upgrade again, or to use the
switch with its prior firmware.
5 Power LED Lights to indicate that the KH0116 is powered up and
ready to operate.
6 Station ID LED The KH0116's Station ID is displayed here. If this is a
Single Station installation (see p. 10), or the First Station
on a Daisy Chained installation (see p. 11), the KH0116
has a Station ID of 01.
On a Daisy Chained installation, the KH0116 auto-senses
its position and displays the Station ID that corresponds to
its place in the chain. (see Port ID Numbering, p. 17 for
details).
kh0116-v2.book Page 6 Wednesday, March 22, 2006 4:53 PM