ATEN Technology Bi-tronics Auto Network Card User Manual


 
)&&#1RWLFH
This device complies with Part 15 of FCC rules. Operation of this device is subject to the following two
conditions.
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesirable
operation.
This equipment generates, uses, and can radiate radio frequency energy and if not properly installed, and used
in strict accordance with the manufacturer’s instructions, may cause harmful interference to radio
communication. If this equipment does produce undesirable interference with radio or television reception, the
user is encouraged to try ad correct the interference by using one or more of the following measures. (The user
can determine if the interference is being caused by the equipment by shutting off the equipment and checking
to see if the interference is still present. Then turning the equipment back on if the interferance dissapated while
the equipment was not functioning to see if the interference returns.)
Reorient or relocate the receiving antenna.
Move the computer away from the reciever.
Plug the computer into a different outlet so that the two devices are on different branch circuits.
If nescessary the user should consult with either the vendor who sold the equipment or an experienced Radio/
Television technician for additional suggestions on how to reduce the interference.
WARNING:
“Shielded interference cable(s) must be used according to FCC Regulations Part: 15
Section: 838 Paragraph: D”
The user is cautioned that changes or modifications not expressly approved by the manufacturer could void the
user’s athourity to operate this equipment.