Filter
Top Products
WebShare 141W
A02-RA141-W54 Pag. 33
5.5 Configuring LAN
Click “Interface Setup” then “LAN” to open the following screen.
The following table describes the labels in this screen.
Router Local IP
IP Address
Enter the IP address of the ADSL Router in dotted decimal
notation, for example, 192.168.1.254 (factory default).
IP Subnet Mask
Type the subnet mask assigned to you by your ISP (if given).
RIP Direction
Select the RIP direction from None, Both, In Only and Out
Only.
RIP Version
Select the RIP version from RIP-1, RIP-2B and RIP-2M.
Multicast
IGMP (Internet Group Multicast Protocol) is a session-layer
protocol used to establish membership in a multicast group.
The ADSL Router supports both IGMP version 1 (IGMP-v1)
and IGMP-v2. Select None to disable it.
Save
Click this button to save these settings back to the ADSL
Router.
Cancel
Click this button to reset the fields in this screen.