Filter
Top Products
WebShare 141W
A02-RA141-W54 Pag. 59
Interface
Select which channel (PVC) to configure
Direction
Select the access to the Internet (“Outgoing”) or from
the Internet (“Incoming”).or Both
IP FILTER RULE EDITING:
Field Meaning
Ip Filter Rule
Index
This is item number
Active
Select Yes from the drop down list box to enable IP filter
rule
Source IP
Address
The source IP address or range of packets to be
monitored
Subnet Mask
It is the destination IP addresses based on above
destination subnet IP
Source Port
Number
This Port or Port Ranges defines the port allowed to be
used by the Remote/WAN to connect to the application.
Default is set from range 0 ~ 65535. It is recommended
that this option be configured by an advanced user
Destination IP
Address
This is the destination subnet IP address
Subnet Mask
It is the destination IP addresses based on above
destination subnet IP
Protocol
It is the packet protocol type used by the application,
select either TCP or UDP or ICMP
Rule Unmatched
Select action for the traffic unmatching current rule;
Forward to leave it pass through, and NEXT to check it by
the next rule
IP FILTER LIST:
Field Meaning
#
Item number
Active
Whether the connection is currently activ
Source IP Mask
The source IP address or range of packets to be
monitored
Destination IP
Mask
This is the destination subnet IP address
Source port
This Port or Port Ranges defines the port allowed to be
used by the Remote/WAN to connect to the application.
Default is set from range 0 ~ 65535. It is recommended
that this option be configured by an advanced user
Destination Port
This is the Port or Port Ranges that defines the application