Filter
Top Products
WEBSHARE 242W
26
You must make sure that the SSID, Encryption and Channel is set the
same as that AP you wish to connect. When WDS is enable only WEP
ecryption is supported.
The range of radio frequencies used by IEEE 802.11b wireless devices is
called a “channel”. Channels available depend on your geographical area.
You may have a choice of channels (for your region) so you should use a
different channel than an adjacent AP (access point) to reduce
interference. Interference occurs when radio signals from different access
points overlap causing interference and degrading performance.
Adjacent channels partially overlap however. To avoid interference due to
overlap, your AP should be on a channel at least five channels away from a
channel that an adjacent AP is using. For example, if your region has 11
channels and an adjacent AP is using channel 1, then you need to select a
channel between 6 or 11.
Please use A02-AP-W54 toextende wireless coverage.
3.6.3.1.3 Wireless Security
You can disable or enable with WPA or WEP for protecting wireless network.
The default mode of wireless security is disabled.