Filter
Top Products
• Enable 802.1x security by selecting “Enable”.
• If MD5 EAP method is used then you can skip step 2 and go to step 3.
• Select the Encryption Key Length Size ranging from 64 to 128 Bits that you would like to
use. Select the Lifetime of the Encryption Key from 5 Minutes to 1 Day. As soon as the
lifetime of the Encryption Key is over, the Encryption Key will be renewed by the Radius
server.
• Enter the IP address, the Port and the Shared Secret used by the Primary Radius Server.
• Enter the IP address, the Port and the Shared Secret used by the Secondary Radius Server.
• Click “Apply” button for the 802.1x settings to take effect after Access Point reboots itself.
NOTE: As soon as 802.1x security is enabled, all the wireless client stations that are connect to
the Access Point currently will be disconnected. The wireless clients must be configured manually
to authenticate themselves with the Radius server to be reconnected.
3.7.7 Tools
This page enables you to:
• Backup
• Restore
• Restore Default Settings
• Firmware Upgrade