Filter
Top Products
25
• Repeat Mode:It is able to extend the effective range and coverage of the wireless network.
Please make sure the SSID is the same as that AP you want to extend.
3.8.2.1 Advanced Settings
• SSID Broadcast: While SSID Broadcast is enabled, all wireless clients will be able to
communicate with the access point. For secure purpose, you may want to disable SSID
broadcast to allow only those wireless clients with the AP SSID to communicate with the
access point.
• Beacon Interval: To set the period of time in milliseconds that AP sends out a beacon.
Default is 100 milliseconds.
• RTS Threshold: To set the size of RTS/CTS packet size. Default is 2432 bytes.
• Fragmentation Threshold: To set the number of bytes used for the fragmentation
boundary for directed messages. Default is 2436 bytes.
• DTIM Interval: This value indicates the interval of the Delivery Traffic Indication
Message (DTIM). A DTIM field is a countdown field informing clients of the next window
for listening to broadcast and multicast messages. When the access point has buffered
broadcast or multicast messages for associated clients, it sends the next DTIM with a
DTIM interval value. Access point clients hear the beacons and awaken to receive the
broadcast and multicast messages.
• TX Rates (MBps): Select one of the wireless communications transfer rates, measured in
megabytes per second, based upon the speed of wireless adapters connected to the WLAN.
• 11G Only Mode: enable or disable.
• Super G: Super G mode is disabled by selecting “Disable” from the drop list. If you like
to use Super G to enhance the speed, there are three options on Super G mode: Super G
without turbo; Super G with Dynamic turbo and Super G with Static turbo. Turbo mode