Filter
Top Products
3.8.2 AP Settings
Basic Setting:
• ESSID: It is used by all wireless devices within the wireless network.
• Channel: Select the appropriate channel from the dropping list. All wireless devices with
the same ESSID will automatically use this channel to communicate with this access point.
• AP Name: users can set the name for access point so as to easily manage the access points
while there are several access points in the network..
Mode Setting:
• Access Point:This is the default for this access point. It connects the wireless PCs to wired
network.
• Access Point Client:Acts as an Ethernet-to-Wireless Bridge, which allows a LAN or a
single computer station to join a wireless ESS network through it. You must make sure
SSID and Channel is set the same as that AP you wish to connect.
• Wireless Bridge:A pair of APs operating under Bridge mode to act as the bridge that
connect two Ethernet networks or Ethernet enabled clients together. You must make sure
that the SSID and Channel is set the same as that AP you wish to connect.
• Multiple Bridge:A group of APs that consists of two or more APs operating under
Multiple Bridge mode, that can connect two or more Ethernet networks or Ethernet
enabled clients together.