Filter
Top Products
Wireless Broadband Router
A02-RB-W54 Pag. 5
The indicators blink green while the WAN port was transmitting
or receiving data on the xDSL/Cable modem.
WLAN
This indicator lights green when there are wireless devices
connected and transmitting data to the Wireless Router.
LAN (1-4)
These indicators light green when the LAN ports were
connected successfully.
These indicators blink green while the LAN ports were
transmitting data.
2.3 The Rear Ports
PORT USAGE
POWER Jack(2)
Plug the power adapter to this power jack
WAN(3)
In the four port broadband router, there is an RJ-45
10/100Mbps Auto-MDIX port for the WAN that will fit
the xDSL/Cable modem’s specification need.
LAN(4)
Four RJ-45 10/100Mbps Auto-MDIX ports for
connecting to either 10Mbps or 100Mbps Ethernet
connections.
Reverse SMA(5)
There are one 2 dBi Gain Antenna in the rear panel for
wireless connection.
Reset(1)
After the device has turned on, press it to reset the
device or restore to factory default settings. Use a pin-