Filter
Top Products
Wireless Broadband Router
A02-RB-W54 Pag. 69
APPENDIX A: Troubleshooting
This chapter covers potential problems on Wireless Broadband Router Point and
the corresponding remedies.
A.1 LEDs
The LEDs are useful aides for finding possible problem causes.
A.1.1 LED Power
The PWR LED on the front panel does not light up.
Steps CORRECTIVE ACTION
1
Make sure that the Wireless Broadband Router power adaptor
is connected to the device and plugged in to an appropriate
power source. Use only the supplied power adaptor.
2
Check that the Wireless Broadband Router and the power
source are both turned on and the device is receiving
sufficient power.
3
If the error persists, you may have a hardware problem. In this
case, you should contact your vendor.
A.1.2 LED LAN
The LAN LED on the front panel does not light up.
Steps CORRECTIVE ACTION
1
Check the Ethernet cable connections between the Wireless
Broadband Router and the computer or hub.
2
Check for faulty Ethernet cables.
3
Make sure your computer’s Ethernet card is working properly.
4
If these steps fail to correct the problem, contact your local
distributor for assistance.