Filter
Top Products
Wireless Broadband Router
A02-RB-W54 Pag. 70
A.1.3 LED WLAN
The WLAN LED on the front panel does not light up.
Steps CORRECTIVE ACTION
1
Press the “Reset” button on the rear panel of the Wireless
Broadband Router, to set back to factory default setting.
2
Please unplug AC Adaptor and replug-it.
3
If these steps fail to correct the problem, contact your local
distributor for assistance.
A.2 WEB
I cannot access the web configurator.
Steps CORRECTIVE ACTION
1
Make sure you are using the correct IP address of the
Wireless Broadband Router. Check the IP address of the
Router (192.168.1.1).
2
Check Mac Filtering (on Security).
3
Press the “Reset” button on the rear panel of the AP, to set
back to factory default setting.
The web configurator does not display properly.
Steps CORRECTIVE ACTION
1
Make sure you are using Internet Explorer 5.0 and later
versions.
2
Delete the temporary web files and log in again.
In Internet Explorer, click Tools, Internet Options and then
click the Delete Files ... button.
When a Delete Files window displays, select Delete all offline
content and click OK. (Steps may vary depending on the
version of your Internet browser.)