Filter
Top Products
Wireless Broadband Router
A02-RB-W54 Pag. 13
3.2 Factory Default Settings
Before configuring the Wireless Broadband Router through WLAN, make sure
that the SSID, Channel and the WEP was set properly.
The default setting of the Wireless Broadband Router that you will use:
• User: admin
• Password: admin
• IP Address: 192.168.1.1
• Subnet Mask: 255.255.255.0
• DHCP Server: enable (192.168.1.100-192.168.1.199)
• Wep Encryption: disable
• SSSID: default
• Channel: 6
3.2.1 Password
When there is a screen needs to enter the Network password, it means that there
is a password settle, type in the password you entered before.
3.2.2 LAN and WLAN Ports
The parameters of LAN and WLAN ports are pre-set in the factory. The default
values are shown below.
LAN WLAN
IP address
192.168.1.1
Subnet Mask
255.255.255.0
Channel=6
SSID=default
Encryption=none