Filter
Top Products
85
S-Registers
S-Register values
5.375 x 8.375 ver 2.4.0
S7 Connection completion time-out
This register sets the time, in seconds, that the modem must
wait before hanging up because the carrier is not detected.
The timer is started when the modem finishes dialing
(originate), or goes off-hook (answer). In originate mode, the
timer is reset upon detection of an answer tone if allowed by
county restriction. The timer also specifies the wait for
silence time for the @ dial modifier in seconds. S7 is not
associated with the W dial modifier.
S8 Comma pause time
This register sets the time, in seconds, that the modem must
pause when it encounters a comma (,) in the dial command
string.
S11 DTMF dialing speed
This register determines the dialing speed.
Range: 1-255
Default: 50
Units: seconds
Range: 0-65
Default: 2
Units: seconds
Range: 50-150
Default: 95
Units: .001 seconds