AT&T 2500 series Network Router User Manual


 
NETWORKING FEATURES——AVAILABILITY MATRIX F-5
_ ______________________________________________________________________________________
_ ______________________________________________________________________________________
_ ______________________________________________________________________________________
NETWORKING FEATURES——AVAILABILITY MATRIX (Contd)
_ _______________________________________________________________________________
‘‘DIMENSION’’ SYSTEM 85 SYSTEM 75 DEFINITY
FEATURE PBX
_ ______________________________________________________________
FP8 R1 R2 R1 G1 G2
_ ______________________________________________________________
Iss 1 Iss 3 - V1 V2 V3 V4 V1 V2 V3
_ ______________________________________________________________________
_ ______________________________________________________________________
Subnet Trunking
(Note 8) Y Y Y Y Y Y Y N Y Y Y Y
_ _______________________________________________________________________________
Tandem Tie
Trunk Switching Y Y Y Y Y Y Y N Y Y Y Y
_ _______________________________________________________________________________
Tie Trunk Access Y Y Y Y Y Y Y Y Y Y Y Y
_ _______________________________________________________________________________
Trunk Identification
By Attendant (Note 9) Y Y Y Y Y Y Y N Y Y Y Y
_ _______________________________________________________________________________
Trunk Verification
By Attendant (Note 10) N N Y Y Y Y Y N Y Y Y Y
_ _______________________________________________________________________________
Trunk Verification
By Customer (Note 10) Y Y N N N N N N Y Y Y N
_ _______________________________________________________________________________
Trunk Verification
By Voice Terminal Y Y Y Y Y Y Y N Y Y Y Y
Busy Out 1-Way
Tie Trunk Y Y Y Y Y Y Y N N N N Y
Busy Out 2-Way
Tie Trunk N Y N N N Y Y N N N N Y
_ _______________________________________________________________________________
Uniform Dial Plan (UDP) N N N N N N N N Y Y Y N
_ _______________________________________________________________________________
Uniform Numbering
Plan (Note 11) Y Y Y Y Y Y Y N Y Y Y Y
_ _______________________________________________________________________________
Notes:
6. Similar capability is available on DIMENSION PBX FP8 Issue 1.13 through Customer Administration Center System (CACS).
7. Centralized System Management capabilities for System 75 are provided by remote access through terminal emulation of local
system management capabilities.
8. With System 85 R2V2, the switch can distinguish between voice terminal extension numbers and attendant positions that begin
with zero at a distant switch. This enhancement increases the range of extension numbers that can be assigned to a switch.
9. System 75 R1V2 also allows a user of a display-equipped voice terminal to identify a specific trunk being used on a call. A
trunk ID button must be assigned to the terminal.
10. Equivalent capability is provided on System 75 R1V2 with Busy Verification of Terminals and Trunks, Facility Test Calls,
and/or System Access Terminal.
11. System 75 and Generic 1 support only a 7-digit uniform numbering plan in an ETN.