Filter
Top Products
6 Audio Authority AVAtrix User Manual
Audio Authority AVAtrix User Manual 7
Other Materials You May Need
• Patch cables (RCA, optical and 3.5mm)
• Infrared emitters and/or infrared remote control receivers—for remote wallplate/receiver IR functionality
• Cat 5e/6 cable—for remote outputs; consider buying a different jacket color for A and B cables
• RJ-45 plugs—for remote outputs; EZ RJ-45 plugs are recommended
• Professional network cable tester—continuity testing is not adequate for Cat 5 cables–twisted pairs must
be properly matched for balanced line performance, so a tester capable of conrming pairs is required
We strongly recommend testing factory-made cables as well as site-fabricated cables!
All cables must have proper EIA-568B pairing (not crossover conguration) for proper function.
(The EIA-568A standard can also be used, but mixing the two standards could result in confusion.)
Video Converter Illustrations
Many possibilities exist for adapting or actively
converting various signal types to work with
the AVAtrix. Refer to the accessory descrip-
tions above. Dotted lines show alternate
congurations.
RGB
Projector
Component
Video Display
S-Video or
Composite
Video Display
1362
Y Pb Pr Source PC
Composite Source
1365
VGA
YPbPr
YPbPr
YPbPr
AVAtrix
YPbPr
YPbPr
1365
RGBHV
1361
S-Video
YPbPr
Cat 5 Output
Cat 5
Receiver
Cat 5
Suggested Audio Authority Accessories
• Model 1176BK High Denition Cat 5 Matrix
Router: connects to internal bus cable to add six
wallplate/receiver outputs the AVAtrix. Maximum
36 Cat 5 receiver outputs per system.
• Model 1172BK Audio Interface: provides an
audio breakout point for the AVAtrix to connect
an independent audio distribution system at the
head end. Provides stereo analog audio or digital
audio.
• Model 9878, 9879 or 9880 Cat 5 wallplate/
receivers: any combination of Cat 5 receiver
styles may be used in one system.
• Model 802-568 7-port bus cable: for up to 5 ex-
panders or routers. (AVX-562 has Model 802-567
4-port bus cable installed at the factory—for up to
2 expanders or routers.)
• Model 1361 Down-converter/scaler: converts
component video to composite video for legacy
TVs.
• Model 1362 Up-converter/scaler: converts com-
posite or S-video signals to component video for
legacy video sources.
• Model 1365 Video Converter: converts YPbPr to
RGBHV or VGA to YPbPr for incompatible video
sources or projectors and video displays.
!