AVerMedia Technologies EB1304 NET Network Card User Manual


 
17
OSD MENU Description
YES
HARD DRIVE SETUP
OVERWRITE ENABLED
HDD SIZE 37 GB 78MB
HDD USED 0 GB 232MB 0%
HDD FORMAT
* HDD SIZE shows the total capacity
of the hard disk.
* HDD USED shows the amount of
space that has been used.
OVERWRITE ENABLED :
Enable/disable overwriting the earliest record when the
hard disk space runs out. By default, the HDD overwrite
setting is enabled
HDD FORMAT :
For security purpose, you may have to enter the
password to format hard disk
To format hard disk:
1. Use the
and
buttons to go up and
down and select
HDD FORMAT
. Then press
or
2. In the
CHECK PASSWORD
screen, press
or
. Then use the
and
buttons
to select the security combination number. Repeat
till you key in the last number. Also, user can use
the number button on the remote control to enter
the password. Press or
button again
to make the selection. To move the selection to the
left and right, use
and
buttons
CHECK PASSWORD
ENTER PASSWORD
3. After entering the last number, the system will
format the hard disk
4. It is done when the “HDD FORMAT COMPLETED
appears
YES
HARD DRIVE SETUP
OVERWRITE ENABLED
HDD FORMAT COMPLETED
HDD SIZE 37 GB 78MB
HDD USED 0 GB 0MB 0%
HDD FORMAT
Formatting the hard disk will permanently
delete all the records and can no longer be
retrieved