Filter
Top Products
8/16/32 PS/2 KVM over IP switch
24
Figure 5-1. The Internet Explorer displaying the encryption key length
Newer web browsers do support strong encryption on default.
5.2 Login into the PS/2 IP-KVM switch and logout
5.2.1 Login into the PS/2 IP-KVM switch
Launch your web browser. Direct it to the address of your PS/2 IP-KVM switch, which you
configured during the installation process. The address used might be a plain IP address or a
host and domain name, in the case where you have given your PS/2 IP-KVM switch a
symbolic name in the DNS. For instance, type the following in the address line of your
browser when establishing an unsecured connection:
http://<IP address of PS/2 IP-KVM>
When using a secure connection, type in:
https://<IP address of PS/2 IP-KVM>
This will lead you to the PS/2 IP-KVM switch login page as shown in Figure 5-2.
Figure 5-2. Login screen
The PS/2 IP-KVM switch has a built-in super user that has all permissions to administrate
your PS/2 IP-KVM switch:
Login name
super (factory default)
Password
pass (factory default)
Table 5-1. Standard user settings