8/16/32 PS/2 KVM over IP switch
44
USB Mouse Type
Enables USB mouse type. Choose between “ MS Windows 2000 or newer ” for MS
Windows 2000 or Windows XP, or “ Other Operating Systems ” for MS Windows NT,
Linux, or OS X. In “ MS Windows 2000 or newer ” mode the remote mouse is always
synchronized with the local mouse.
Mouse Speed
• Auto mouse speed
Use this option if the mouse settings on host use an additional acceleration setting. The
PS/2 IP-KVM switch tries to detect the acceleration and speed of the mouse during the
mouse sync process.
• Fixed mouse speed
Use a direct translation of mouse movements between the local and the remote pointer.
You may also set a fixed scaling which determines the amount the remote mouse
pointer is moved when the local mouse pointer is moved by one pixel. This option only
works when the mouse settings on the host are linear. This means that there is no
mouse acceleration involved.
To set the options, click on the button “ Apply ”.
6.3.4 Video
Figure 6-18. Video Settings
Local Video Port Settings
Enable local video port
This option decides if the local video output of the PS/2 IP-KVM switch is active and
passing through the incoming signal from the host system.
Miscellaneous Video Settings
• Noise filter
This option defines how the PS/2 IP-KVM switch reacts to small changes in the video
input signal. A large filter setting needs less network traffic and leads to a faster video
display, but small changes in some display regions may not be recognized immediately.