Filter
Top Products
PJWU-101B 17/10/2014
60
12.Control
IP Address
Internet Protocol. The network layer of TCP/IP. Required for communication with the internet.
Can only be used with a wireless network module installed.
Subnet mask
A number that is used to identify a subnetwork so that IP addresses can be shared on a local area network.
Can only be used with a wireless network module installed.
Subnet for Wired and Wifi must be different !
Gateway
A router that serves as an entry point into and exit point out of a network. For example, a local network (LAN) may need a
gateway to connect it to a wide area network (WAN) or to the Internet.
Can only be used with a wireless network module installed.
HDCP
Dynamic host configuration protocol. DHCP is a communications protocol that lets network administrators manage centrally
and automate the assignment of IP addresses in an organization’s network. Using the Internet Protocol, each machine that
can connect to the Internet needs a unique IP address. When an organization sets up its computer users with a connection to
the Internet, an IP address must be assigned to each machine. Without DHCP, the IP address must be entered manually at
each computer and, if computers move to another location in another part of the network, a new IP address must be entered.
DHCP lets a network administrator supervise and distribute IP addresses from a central point and automatically sends a new
IP address when a computer is plugged into a different place in the network.
Can only be used with a wireless network module installed.
12.4 Menu Position
You can use this function to designate which area on the image the OSD Menu will appear.
As you can see from the diagram below, there are five positions where you can choose to have the OSD Menu displayed.The
default setting is “Center”.
Top Left
Center
Bottom Left
Top Right
Bottom Right