Filter
Top Products
30 Coronis Fusion 10MP
Keys sound
ABOUT THE KEYS SOUND
By default, the keys will make a “beep” sound on every touch. However,
this sound can be disabled so that no sound will be heard when using
the keys.
TO ENABLE/DISABLE THE KEYS SOUND:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > User Interface > Controls menu.
3 Enter the Sound submenu.
4 Select Enabled/Disabled as desired and confirm.
DPMS mode
ABOUT DPMS MODE
Enabling the Display Power Management System (DPMS) mode on your
display will optimize its diagnostic lifetime by automatically switching
off the backlight when the display is not used for a specified period of
time. By default, DPMS mode is enabled on your display, but it also
needs to be activated on your workstation. To do this, go to the “Power
options properties” window of your workstation.
TO ENABLE/DISABLE DPMS MODE ON YOUR DISPLAY:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Power Management menu.
3 Enter the DPMS Mode submenu.
4 Select Enabled/Disabled as desired and confirm.
Barco recommends setting DPMS activation after 20 minutes of
non-usage.