Filter
Top Products
Coronis Fusion 10MP 31
Luminance target
ABOUT THE LUMINANCE TARGET
The luminance target of your CORONIS FUSION 10MP display is adjustable
over a predefined range. When you change the luminance target, the
display will adjust its backlight to reach the target.
TO SET THE LUMINANCE TARGET:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Calibration menu.
3 Enter the Luminance Target submenu.
4 Set a luminance target value as desired and confirm.
Viewing modes
ABOUT VIEWING MODES
The CORONIS FUSION 10MP display can be used in two viewing modes:
TO SELECT A VIEWING MODE:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Calibration menu.
3 Enter the Viewing Mode submenu.
4 Select Diagnostic/Text as desired and confirm.
Diagnostic This mode provides the full calibrated
luminance and is intended for using the
display for diagnostic purposes.
Text In this mode, the luminance is reduced to
approximately half of the luminance. This is
intended for using the display with office
applications such as word processing.