Filter
Top Products
34 Coronis Fusion 4MP/6MP
READING ROOM DEFINITION SUBMENU
Calibration info Jumps to the calculation information
submenu, which displays information
about the values taken into account to
recalculate the DICOM DF.
Measured ambient
light
Indicates the ambient light actually
measured by the ambient light sensor on
the front of the display. This is a read-only
value.
Averaged ambient
light
Shows the average of the measured
ambient light since the display was
switched on. This is a read-only value.
Reading room Indicates the reading room type you are
editing. You can select another room to
edit by using the Up or Down touch
keys or rotating the control wheel.
Max. ambient light This indicates the maximum ambient light
that corresponds to the selected reading
room.
If the measured ambient light is higher
than the value entered here, you should
take measures to darken the room or
select another reading room type.
Preset corr. value This value is taken into account in the
calculation of the DICOM DF if Continuous
DICOM ALC is switched off and DICOM
Offset is set to “Preset”.
To each reading room type corresponds
another preset value.