Barco 4MP/6MP Projector User Manual


 
Coronis Fusion 4MP/6MP 39
Changing the viewing mode
ABOUT VIEWING MODES
The display contains two viewing modes. Diagnostic viewing mode
provides the full calibrated luminance. This mode is intended for using
the display in diagnostic applications.
In Text mode, the luminance is approximately half of the luminance in
Diagnostic mode. This is intended for using the display with office
applications such as word processing.
SWITCHING VIEWING MODES BY MEANS OF THE KEYS
While the OSD is not on the screen, touch the Up and Down touch
keys at the same time. As a result the display switches to another
viewing mode. The viewing mode is indicated by a message that
appears for a few seconds after switching the viewing mode.
SWITCHING VIEWING MODES BY MEANS OF THE OSD MENUS
You can also switch viewing modes in the Luminance and color menu.
Enabling/disabling User Controls
TO DISABLE THE USER CONTROLS:
1 Open the OSD main menu.
2 Open the Settings menu.
3 Select User Controls.
4 Select Off.
5 Return to the Settings menu.
6 Exit the OSD
Now the user cannot display the OSD again until the user controls
keycode is entered (see below).