Barco 4MP/6MP Projector User Manual


 
Coronis Fusion 4MP/6MP 37
OSD Orientation Select the desired orientation of the on-
screen display. The default position is
Landscape, but if you put the display in
portrait orientation (possible but not
supported), you should select Portrait as
OSD orientation as well. If not, the OSD will
not be easily readable.
Input Switch Mode Select “Auto” if you wish the display to
select the video inputs automatically. If
only one video input is connected, the
image will be shown in the center of the
screen. If both video inputs are connected,
the video signal connected to the “Left”
input is shown on the left side of the
screen and the signal connected to the
“Right” connector is shown on the right
side. If one of the video signals exceeds
the resolution of 1640x2048, the signal is
suppressed.
Select “Left” to display only the signal
connected to the “Left” video input.
Select “Right” to display only the signal
connected to the “Right” video input.
Preferred Input Select the video resolution you wish the
connected graphic board(s) to reproduce.
Before changing this setting you must
switch off the PC. After changing the
setting, switch on the PC so that the
graphic board changes its resolution.
This function takes effect with plug-and-
play graphic boards only.
More information can also be found in the
Getting Started manual.