Filter
Top Products
2. Xenon bulb lamp replacement process
Image 2-8
3. Install the lamp cathode adaptor (A) upon the xenon bulb lamp (L) as illustrated. Use
torque 2,5 Nm to fasten the fix ation screw
(S)oftheadapter. Useforthatatorquewrenchwitha5mmAllensocket. Makesurethatthereisfullcontactbetweenthe
cathode adapter and the lamp base.
Note: The cathode lamp adaptor is delivered in a separate bag with t
he projector. In ca se of a lamp replacement you have to
reuse the adaptor from the xeno n bulb lam p which you want to replace.
S
L
A
2,5 Nm
Image 2-9
4. Install the anode wire lug (L) upon the anode socket (S). Hold fast the nut N1 with an open-end wrench while fastening the nut N2
with a torque of 9Nmusing a torque wrench. Ensure that at both sides of the w ire lug L a plane washer (W1 & W2) is present.
Note: The ano de socket is located jus t below the UV blocker and can easily be removed from the lamp house. In case of a lamp
replacement you have to reuse the anode socket which is connected to the xenon bulb lamp which you want to replace.
14
R59770175 XENON BULB LAMP REPLACEMENT 24/09/2008