Filter
Top Products
2. Xenon bulb lamp replacement process
2.4 Installation of t he lamp house
WARNING: This procedure may only be performed by qualified technical service personnel.
CAUTION: Due to its high internal pressure, the lamp may exp lode in either hot o r cold states if imp roperly
handled.
Necessary tools
7mmflat screw drive r.
How to install the lamp house of the projector ?
1. Ensure the projector is switched off.
2. Remove the lamp cover.
3. Hold fast the lamp house by its handles and gently slide the lamp house into its s ock et. Note that the compartment is provided
with guides (G) to position the lamp house correctly.
G
C
Image 2-17
4. Push the lamp house forward until it slides fully into the projector.
5. Secure the correct position of the lamp house by tightening all three spring lock screws as illustrated.
Image 2-18
6. Reinstall the lamp cover of the projector.
18
R59770175 XENON BULB LAMP REPLACEMENT 24/09/2008