Filter
Top Products
2. Xenon bulb lamp replacement process
Image 2-12
8. Reinstall the UV blocker assembly as illustrated. Make s ure that the xenon bulb lamp is properly supp orted by the lam p supporting
mechanism in the centre of the UV b locker. Use the opening at the side of the lamp h ouse to guide the supporting pin of the
xenon bulb lamp into the anod e supporting mechanism.
Image 2-13
9. Secure the U V blocker by fastening the four thumbscrews as illustrated.
Note: Please ensure that the thumb screws turning wire s are flash with the cover or interference will occur while inserting t he
lamp house into the projector.
Image 2-14
10.Fas ten the cathode side of the xenon bulb lamp using a hexagon socket head screw M6 x 40 and a plane was her as illustrated.
Use a torque of 2,5 Nm to fasten the hex agon socket head screw. Use for that a torque wrench with a 5 mm Allen socket.
Caution: Make sure that the both pins (reference A of image 2-15) of the cathode adapter remain engaged in the foreseen
slots. Therefor, use one hand to keep the xenon bulb lamp into position while inserting the hexagon socket head
screw.
16
R59770175 XENON BULB LAMP REPLACEMENT 24/09/2008