Filter
Top Products
Display information
29
2. In the ALC & DICOM Options menu, use Up or Down to
select DICOM Offset. Use Enter
to go into edit mode.
3. Use Up
or Down to select an offset.
4. Use Enter
to save the changes.
You can select the following offsets:
Reading room selection
This function is available only when the DICOM display function is
selected.
To select a reading room setting:
1. Select the DICOM display function. See To select a display
function (DF):, on page 27.
2. In the ALC & DICOM Options menu, use Up
or Down to
select Reading Room. Use Enter
to go into edit mode.
3. Use Up
or Down to select the reading room that
corresponds to the room type the display is installed in.
4. Use Enter
to confirm the selection.
Value Description
Dark Room The DICOM DF will be recalculated tak-
ing an ambient light value of 0 lux into
account.
This means that the measured ambient
light does not influence the DICOM DF.
Preset The DICOM DF will be recalculated tak-
ing a preset ambient light value into
account. This value is determined by the
selected Reading Room and can be
adjusted manually within certain limits.