Filter
Top Products
Display information
32
Switching Power LED on/off
To switch the power LED on/off:
1. Touch any of the soft touch keys.
The front illumination is switched on.
2. While the illumination is on, touch the Enter
touch key to
display the main menu.
3. Use the Up
or Down touch keys to select the Settings
menu. Use Enter
to open the menu.
4. Use Up
or Down to select Power LED. Use Enter to go
into edit mode.
5. Use Up
or Down to select On or Off.
6. Use Enter
to save the changes.
Note:
• When the display is switched in stand-by, the power LED will
turn orange, even if the power LED setting is switched off.
• When the power LED setting is switched off, the LED will still
turn on (green) when the display is on but receives no video
signal.
Enabling/disabling User Controls
To disable the user controls:
1. Open the OSD main menu.
2. Open the Settings menu.
3. Select User Controls.
4. Select Off.
5. Return to the Settings menu.