Filter
Top Products
User manual MFGD 2320 28
G->Y........................ The Green video signal from the imaging board
is used as luminance value to drive the RGB
subpixels of the panel equally.
B->Y ........................ The Blue video signal from the imaging board is
used as luminance value to drive the RGB
subpixels of the panel equally.
R->Y ........................ The Red video signal from the imaging board is
used as luminance value to drive the RGB
subpixels of the panel equally.
Note: The LCD panel used in this display is originally an RGB panel, of
which the colors are disabled. All RGB subpixels are used for
grayscale reproduction.
Extended input mode
The submenu Extended contains all the items from the Standard
submenu, plus the following possibilities:
GRB->Y................... The RGB video signals from the imaging board
are calculated and transformed into a single
luminance value according to the formula
0.3G + 0.59R + 0.11B. This single luminance
signal drives the RGB sub-pixels of the panel
equally.
GBR->Y................... The RGB video signals from the imaging board
are calculated and transformed into a single
luminance value according to the formula
0.3G + 0.59B + 0.11R. This single luminance
signal drives the RGB sub-pixels of the panel
equally.
BRG->Y................... The RGB video signals from the imaging board
are calculated and transformed into a single
luminance value according to the formula
0.3B + 0.59R + 0.11G. This single luminance
signal drives the RGB sub-pixels of the panel
equally.
BGR->Y................... The RGB video signals from the imaging board
are calculated and transformed into a single
luminance value according to the formula
0.3B + 0.59G + 0.11R. This single luminance
signal drives the RGB sub-pixels of the panel
equally.