Filter
Top Products
User manual MFGD 2320 29
OSD position
With the OSD function you can select where on the screen the OSD
menu text will appear. You can select between center position, top left,
top right, bottom left or bottom right.
4.4. Advanced functions in the Scan Mode menu
The Scan Mode menu contains the following advanced functions:
Autoscan
Click the control wheel to switch the Autoscan system on/off.
We recommend, however, to leave the Autoscan function on. When
on, the display automatically looks if the connected video signal
matches a scanning mode from the predefined table of scanning
modes. When switched off, you can select a scanning mode manually.
However, the settings stored in the predefined table for the manually
selected scan mode, may not be suited at all for the connected video
signal. In that case the result will be a distorted image.
For more information, see also § "Controlling the display" in the
previous chapter.
Reset All
Click the control wheel if you wish to reset all the settings of all scan
modes. In the menu that appears next, click on Proceed to reset the
settings.
4.5 Advanced functions in the Information menu
The following advanced functions are situated in the General informa-
tion menu.
Service
The Service information menu contains the following items:
Display Name .......... The display type
Display Ser No ........ Indicates the display serial number
Display Stock No ..... Indicates the display order number
Panel ....................... Indicates the flat panel serial number
Panel Prod Date ...... Indicates the flat panel production date