Barco MFGD 3621 Projector Accessories User Manual


 
Video connection
45
Video connection
Connecting DVI cables: One display:
Figure 15
1. Connect one end of the DVI cable to the DVI input of the display.
2. Connect the other end of the DVI cable to the DVI connector of the
display controller board. If this board has 2 video heads (2 video
outputs), connect to output Vid 1 (Head A).
Connecting DVI cables: Two displays:
1. Connect the left display (when looking at the front side) to display
controller output Vid 1 (Head A) as described above.
2. Connect the second display to output Vid 2 (Head B).
(1)