Barco MFGD 3621 Projector Accessories User Manual


 
Display operation
75
3. To exit from a menu, rotate the control wheel to select EXIT and
press the control wheel shortly.
If you exit from the Main Menu, you exit the OSD.
4. To change an adjustment value (e.g., the luminance value), rotate
the control wheel to select the adjustment and press the wheel
shortly.
The adjustment name appears, as well as the current adjustment
value. Rotate the wheel to change the value.
When done, press the wheel shortly to confirm the change and
return to the menu.
5. To select a value from a predefined list (e.g., in Settings), rotate
the control wheel to select the setting and press the control wheel
until the desired value appears.
Locking and unlocking user controls
The User Controls function allows to disable or enable the control wheel
functions.
When user controls are disabled, you cannot:
display and use the on-screen display
switch the display in stand-by mode
To disable user controls:
1. Rotate the control wheel to display the on-screen display. The
Main Menu appears.
2. Rotate the control wheel to select Settings.
3. Press the control wheel to enter the Settings menu.
Figure 26: Settings menu
SETTINGS
DPMS On
Power LED On
User Controls On
EXIT