Filter
Top Products
User manual MIVD 1218
14
3. Operation
3.1. Introduction
The control wheel (3) at the bottom (landscape
orientation) or at the side (portrait orientation)
allows you to perform controls.
The control wheel is a rotation - click system. It
provides the following functions:
• Short click: Enter menus, confirm selections,
and toggle between different options
• Long click: Exit menus
• Rotate: Browse through menus, increase or decrease adjustment
values
Navigating through the menus
• The menu system has a hierarchical structure, with several levels.
To display the on-screen menus, click or turn the wheel (3). The
Main Menu appears. This is the top level of the menu system.
• To browse or scroll through the menus on the current level, turn
the wheel clockwise or counter-clockwise.
• To enter into a menu or move to a lower level of the menu
structure, click the wheel shortly.
• To exit from a menu or move to a higher level of the menu
structure, click and hold the wheel for a few seconds.
If you do this when you are in the Main Menu, you exit the menu
system.
• To execute one of the controls or change a value:
- Click the wheel shortly to select the control
- Turn the wheel to change the value
- Click the wheel shortly to confirm the change
Saving changes
Most of the settings and values you can change in the menu system,
are related to the memory scan modes. E.g., for each scan mode,
you can select a particular look-up table.
When you try to exit the menu system while you have changed any
of the scan mode related parameters, the menu system will ask if you
wish to save the changes:
Save Changes (3)
EXIT , Press long
3