Barco R5976907/00 Projector User Manual


 
9. Image Control
Image 9-5
Lens Zoom
9.2.3 Lens Focus
The focus adjustment is located just below the lens on the left side (C on image 9-6). Remove the side cover
nearest the lens and open the dust sock around the lens.
How to focus?
1. Loose fixation nut C1. (image 9-6)
2. Turn the knurled torque knob (C2) to the left or to the right until the center of the image is focused (sharp image).
3. Fasten screw C1 again to secure the focus position.
C
C1
C2
Image 9-6
Focus adjustment
9.2.4 Lens Shift
What can be done?
By using the vertical and/or the horizontal shift adjustments on the lens, it is possible to shift the image upw ards/downwards (=
vertical shift adjustment) and/or to the left/r ight (= horizontal shift adju stment)
The shift adjustments are located on the lens holder. The covers must be removed before any shift adjustment
is possible. On image 9-7, A = horizontal shift, B = vertical shift.
How to shift?
1. For a vertical shift, loosen first fixation nut A1. (image 9-7)
R5976907 D-CINE PREMIERE DP100 02/11/2005
31